Is your Linksys router internet LED blinking amber? Can’t you stream your favorite movies using Linksys router? If yes, then let’s help you fix the issue in no time. This troubleshooting post will help you make your Linksys router up and running so that you can enjoy the lag-free internet in every nook and cranny of your house. Let’s begin!
Your Linksys router flaunts various LEDs. Each of them plays different roles and functionalities. If your Linksys router internet LED is continuously showing you the amber color, you need to wait for some time as your router is detecting the internet connection.
What if your Linksys router internet LED keeps blinking amber? Need not to worry! To get rid of Linksys router internet LED blinking amber issue, walk through the steps listed below.
Troubleshoot Linksys Router Internet LED Blinking Amber Issue
Linksys router internet LED blinking amber issue can occur either after performing the router reset process or updating its firmware. No matter why you are getting the Linksys router internet LED blinking amber issue, the effective tips right from us will surely help you fix the problem in minutes.
Reboot Your Linksys Router
Yes, you read it right! You might find this troubleshooting tip simple, but it works in most cases to fix all router-related issues. To reboot your Linksys router, simply unplug it from its respective power socket and plug it back in again after a few minutes. Give your router a fresh start and see if the internet LED blinking amber issue has been fixed or not.
Check the Firmware Version on Your Linksys Router
If the issue still persists even after updating the firmware on your Linksys router, then check whether you have updated the right firmware version for your Linksys router’s model or not. Updating the wrong firmware on your Linksys router may also get you into the mess of internet LED blinking amber issue. So, to fix the issue, you are suggested to update the firmware of your Linksys router keeping its model number in mind.
Check the Cable Connections
Your Linksys router internet LED might be blinking amber if there is an issue with your cable connections. So, check if all your devices including Linksys router, modem, and client devices are connected properly. Also, check whether your Linksys router is plugged in properly and getting sufficient power supply.
After making the cable connection between your Linksys router and client device, try to access the settings page of your router using the correct Linksys router login password.
Reconfigure Your Linksys Router
You might find it a simple trick, but reconfiguring your Linksys router works in most cases. Partial or incomplete configuration of your Linksys router is one of the biggest reasons behind getting blinking internet LED issue. To get that fixed, reconfigure your Linksys router by accessing the Linksys router login. On the off chance if you are not aware of the complete Linksys router installation steps, worry not! Have a quick glance at the Linksys router setup steps given-below.
Steps to Reconfigure Your Linksys Router
- Connect the Ethernet cable to the Linksys router’s internet port.
- Then, connect your modem to any of the router’s (1, 2, 3 or 4) ports.
- Connect the power adapter of your Linksys router to the working power outlet.
- Access the router’s web-based setup page on a PC or laptop.
- Enter 192.168.1.1 in the address bar and then press the Enter key.
- You will be asked for Linksys default password.
- Fill the Linksys router login password carefully and click on OK.
- Follow the on-screen instructions and click on Save Settings to apply the changes.
Note: For Linksys extender setup, visit http //extender.linksys.com setup page.
This is how you can reconfigure your Linksys router and get rid of internet LED blinking amber issue. Just in case you are still experiencing the same issue, it is suggested to contact our technicians via comments.